JWA 081÷211 VV/H/P/A

High efficiency air cooled liquid chillers with axial fans, (Inverter) Screw compressor and plate exchanger

The units are compliant to the ErP 2021 Regulation for process cooling application; for comfort cooling application they are compliant if provided with EC or ECH accessory (EC Inverter fans).

Versions

JWA - Cooling only
JWA/MC - Cooling only with MICROCHANNEL condensing coils
JWA/SSL - Super silenced cooling only
JWA/MC/SSL - Super-silenced cooling only with MICROCHANNEL condensing coils

Power range

79,0-208 kW
22,0-59,0 Ton

Features

Structure with supporting frame, made of galvanised sheet metal with additional protection provided by polyester powder coating.
Screw compressor with built-in oil separator, suction filter, crankcase heater, oil sight glass, thermal protection and stepless capacity steps.
Axial fans directly coupled to an electric motor with external rotor.
Condenser made of copper tube and aluminum finned coils or aluminium MICROCHANNEL coils.
Evaporator AISI 316 stainless steel braze welded plates type with one circuit on the refrigerant side and one on the water side, complete with water differential pressure switch.
Cooling circuit shut-off valves on discharge and liquid line.
Electronic expansion valve.
Electronic high and low pressure gauges.
Electrical board includes: main switch with door safety interlock, fuses, thermal protection relays for compressors and thermocontacts for fans.
Condensing Control is included: electronic proportional device that ensures efficient and continuous functioning of the unit with outside air temperature down to 0 °C. It also allows to reduce the sound level especially at night. It consists of a fans speed controller with continuous speed regulation and high and low pressure transducers on cooling circuit.
Microprocessor control and regulation system.

Accessories

Factory fitted accessories

IM Automatic circuit breakers
RE Adjustable minimum/maximum voltage and phase control relay
SL Unit silencement
DSV Double relief safety valve with changeover switch on the high pressure side for each refrigerant circuit
DSVHL Double relief safety valve with changeover switch on the high and on the low pressure side of each refrigerant circuit
CC Condensing control down to -20 °C
BT Low water temperature kit
EC EC Inverter fans
ECH EC Inverter fans with high available static pressure
RT Total heat recovery
TX Coil with pre-coated fins
TXB Coil with epoxy treatment
SI Inertial tank
PS Single circulating pump
PSI Inverter single circulating pump
PD Double circulating pump
PDI Inverter double circulating pump
GS Single circulating pump gasket for glycol >30%
GD Double circulating pump gaskets for glycol >30%
FE Antifreeze heater for evaporator
FN Antifreeze heater for pipes
FO Antifreeze heater for tank and pipes
FG Antifreeze heater for single pump and pipes
FM Antifreeze heater for double pump and pipes
FUM Antifreeze heater for tank, single pump and pipes
FDM Antifreeze heater for tank, double pump and pipes
IQ Inverter on one compressor
SS Soft start
WM Web Monitoring - Wireless remote monitoring (GPRS/EDGE/4G/TCP-IP)
IS Modbus RTU protocol, RS485 serial interface
IST Modbus TCP/IP protocol, Ethernet port
ISB BACnet MSTP protocol, RS485 serial interface
ISBT BACnet IP protocol, Ethernet port
ISS SNMP protocol, Ethernet port
IAV Remote set-point, 0-10V signal
IAA Remote set-point, 4-20mA signal
IAS Remote signal for second set-point activation
IDL Demand limit from digital input
CP Potential free contacts
MN High and low pressure gauges

Loose accessories

CR Remote control panel
RP Coils protection metallic guards
FP Coils protection metallic guards with filter
AG Rubber shock absorbers
AM Spring shock absorbers