JWA/FC 081÷171 VV/H/P

Aircooled liquid chillers Free-Cooling with axial fans, (Inverter) screw compressor and plate exchanger

The liquid Chillers of the JWA/FC 081÷171 VV/H/P series, with HFO-R1234ze refrigerant, offer innovative technology to meet the needs of large systems for both domestic as well as industrial applications requiring the production of cooled water continuously year-round. The latest generation refrigerant HFO-R1234ze, with GWP<1 (Global Warming Potential), is the most environmentally sustainable refrigerant on the market, and meets the strictest international environmental regulations.
During the cold months, in FREE-COOLING operating mode, the liquid returning from the system is cooled directly by forced convection of outdoor air through the condensing coil, thus saving energy by not operating the unit's Screw compressors. A 3-Way valve system is controlled by the electronic microprocessor controller, allowing functioning in CHILLER, FREE-COOLING or MIXED (simultaneously CHILLER and FREE-COOLING) modes.
Are available as option the new EC Inverter fans with high available static pressure and efficiency.
The units are compliant to the 2021 ErP Regulation for process cooling application.

Versions

JWA/FC - Cooling only

Power range

82,0-170 kW
23,0-48,0 Ton

Features

Structure with supporting frame, made of galvanised sheet metal with additional protection provided by polyester powder coating.
Screw compressor with built-in oil separator, suction filter, crankcase heater, oil sight glass, thermal protection and stepless capacity steps.
Axial fans directly coupled to an electric motor with external rotor.
Condenser made of copper tubes and aluminium finned coils combined with FREE-COOLING coils.
Evaporator AISI 316 stainless steel braze welded plates type with one circuit on the refrigerant side and one on the water side, complete with water differential pressure switch.
Cooling circuit shut-off valves on discharge and liquid line.
Electronic expansion valve.
Electronic high and low pressure gauges.
Electrical board includes: main switch with door safety interlock, fuses, thermal protection relays for compressors and thermocontacts for fans.
Condensing Control is included: electronic proportional device that ensures efficient and continuous functioning of the unit with outside air temperature down to –20 °C. It also allows to reduce the sound level especially at night. It consists of a fans speed controller with continuous speed regulation, high and low pressure transducers on cooling circuit and an electrical heater on electrical board.
Microprocessor control and regulation system.

Accessories

Factory fitted accessories

IM Automatic circuit breakers
SL Unit silencement
DSV Double relief safety valve with changeover switch on the high pressure side for each refrigerant circuit
DSVHL Double relief safety valve with changeover switch on the high and on the low pressure side of each refrigerant circuit
BT Low water temperature kit
EC EC Inverter fans
ECH EC Inverter fans with high available static pressure
RT Total heat recovery
TX Coil with pre-coated fins
SI Inertial tank
PS Single circulating pump
PSI Inverter single circulating pump
PD Double circulating pump
PDI Inverter double circulating pump
GS Single circulating pump gasket for glycol >30%
GD Double circulating pump gaskets for glycol >30%
IQ Inverter on one compressor
SS Soft start
WM Web Monitoring - Wireless remote monitoring (GPRS/EDGE/4G/TCP-IP)
IS Modbus RTU protocol, RS485 serial interface
IST Modbus TCP/IP protocol, Ethernet port
ISB BACnet MSTP protocol, RS485 serial interface
ISBT BACnet IP protocol, Ethernet port
ISS SNMP protocol, Ethernet port
IAV Remote set-point, 0-10V signal
IAA Remote set-point, 4-20mA signal
IAS Remote signal for second set-point activation
IDL Demand limit from digital input
CP Potential free contacts
MN High and low pressure gauges

Loose accessories

CR Remote control panel
RP Coils protection metallic guards
AG Rubber shock absorbers
AM Spring shock absorbers