JWH/BH 020÷342 S/Y/P

Watercooled Heat Pumps for very high temperature hot water production with scroll compressors and plate exchangers.

_icona_clint_solo_riscaldamento_2024.png _icona_clint_compressore_scroll_2024.png _icona_clint_exchanger_plate_2024.png _icona_clint_solution_DHW_2024.png _icona_clint_refrigerant_R134a_2024.png _icona_clint_refrigerant_R513A_2024.png

The units are designed to produce hot water at very high temperature, in compliance with the most stringent directives on energy efficiency and respect for the environment. In addition to this, their flexibly interacts with all technological plant solutions defined for every type of building, be it residential, commercial or industrial.
These units are ideal for indoor installation and, equipped with a self-contained structure, they can reduce the overall dimensions to a minimum while at the same time making installation and maintenance operations easier.
Thanks to the high construction standard and the precise regulation system, the units are able to guarantee a very high efficiency both at the nominal operating point and in partial load conditions.
These characteristics are visible on the machine's working range which is among the most extensive on the market with the production of hot water leaving the condenser up to 80° C with evaporator water outlet temperatures up to 40° C.
The units are compliant to the ErP Regulation.
On request, units can be supplied with R513A refrigerant.

Versions

  • JWH/BH - Heat Pump

Power range

  • 37,0-550 kW
  • 11,0-156 Ton

Features

  • Structure with supporting frame, made of galvanised sheet metal with additional protection provided by polyester powder coating.
  • Scroll compressors with oil sight glass, internal overheat protection and crankcase heater.
  • Condenser AISI 316 stainless steel braze welded plates type with one circuit on the refrigerant side and one on the water side in 020÷171 models; with two independent circuits on the refrigerant side and one on the water side in 262÷342 models, complete with water differential pressure switch.
  • Evaporator AISI 316 stainless steel braze welded plates type with one circuit on the refrigerant side and one on the water side in 020÷171 models; with two independent circuits on the refrigerant side and one on the water side in 262÷342 models, complete with water differential pressure switch.
  • Electronic expansion valve.
  • Electronic high and low pressure gauges.
  • R134a refrigerant. On request R513A refrigerant.
  • Electrical board includes: main switch with door safety interlock, fuses, thermal protection relays for compressors, interface relay and terminals for external connections.
  • Microprocessor control and regulation system.

Factory fitted accessories

  • IM Automatic circuit breakers
  • SL Unit silencement
  • RFM Cooling circuit shut-off valve on discharge line
  • RFL Cooling circuit shut-off valve on liquid line
  • PV3E 3-Way electronic pressostatic valve for evaporation control
  • PV3C 3-Way electronic pressostatic valve for cold start
  • FI Antifreeze heater for evaporator and condenser
  • SS Soft start
  • IS Modbus RTU protocol, RS485 serial interface
  • IST Modbus TCP/IP protocol, Ethernet port
  • ISB BACnet MSTP protocol, RS485 serial interface
  • ISBT BACnet IP protocol, Ethernet port
  • ISS SNMP protocol, Ethernet port
  • IAV Remote set-point, 0-10V signal
  • IAA Remote set-point, 4-20mA signal
  • IAS Remote signal for second set-point activation
  • IDL Demand limit from digital input
  • IVE 0-10V signal for the management of the 3-Way electronic pressostatic valve for evaporation control
  • IVC 0-10V signal for the management of the 3-Way electronic pressostatic valve for cold start
  • MN High and low pressure gauges

Loose accessories

  • CR Remote control panel
  • AG Rubber shock absorbers
  • AM Spring shock absorbers